An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium     

H. Tan  D. Feng  J.S.J. van Deventer  G.C. Lukey 《International Journal of Mineral Processing》2006,80(2-4):153-168

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.  相似文献   

Visualization experiments of iron precipitates: Application for in-situ arsenic remediation     

M.I.M. Darwish  V.M. van Beek  J. Bruining 《Journal of Geochemical Exploration》2006,88(1-3):19

Laboratory experiments were carried out to acquire more insight and understanding of the phenomena associated with the in-situ arsenic remediation. Visualization techniques are the most informative for the detection of Fe(II) while flowing in soils. Green Rust (GR) was considered as representative of in-situ iron precipitates. In a visualization flat cell, the change in color of GR to orange, due to oxidation, was monitored by a digital camera and the images were analyzed giving the spatial and temporal distribution of Fe(II). Moreover, both oxygen and pH changes in time were recorded in two sections along the flow direction in the cell. The measured and calculated concentration profiles were compared and the actual reaction rates were predicted. The reaction rate constants measured in this study, under flowing conditions, are in a good agreement with the values obtained from batch experiments reported in the literature.  相似文献   

Developments in the characterisation of waste materials for environmental impact assessment purposes     

H.A. van der Sloot  J.C.L. Meeussen  A. van Zomeren  D.S. Kosson 《Journal of Geochemical Exploration》2006,88(1-3):72

The characterisation of waste is entering a new phase with the latest developments of characterisation leaching tests and associated modelling capabilities. The currently applied too simple testing approaches lead to poor choices in waste management. With the increased insight in release controlling processes chemical speciation aspects can be addressed even in the most complex and heterogeneous waste materials. From a composition perspective materials may be highly variable, but often materials are far more consistent in their leaching behaviour. This aspect should be exploited more extensively as it holds the key to treat waste materials in such a way that long term solutions are achieved rather than reaching temporary gains.  相似文献   

Comparative study of sampling methods and in situ and laboratory analysis for shallow-water submarine hydrothermal systems     

R.E. Villanueva  R.M. Prol-Ledesma  M.A. Torres-Vera  C. Canet  M.A. Armienta  C.E.J. de Ronde 《Journal of Geochemical Exploration》2006,89(1-3):414

A primary aim for sampling of submarine hydrothermal vents is to minimize inclusion of ambient seawater. Here, we compare the results of three different sampling methods (air displacement, two-valve bottle, and syringes) for shallow submarine systems. Mixing of hydrothermal fluid with seawater is unavoidable; however, calculations based on linear mixing models allow estimation of the hydrothermal fluid end-member composition. The results show that sampling with a two-valve bottle and syringes are the best options because they allow collection of samples with a large proportion of hydrothermal fluid. Additionally, we compare the results of in situ and laboratory analyses of the fluid samples, and demonstrate that determination of chemical composition in situ is the best option for some components, as re-equilibration affects some component concentrations (i.e. bicarbonate). Conversely, silica determination in situ usually underestimates the concentration in the fluid, as it does not account for polymeric silica. Other components can be measured either in the field or in the laboratory.  相似文献   

Comparison of soil solution chemistry sampled by centrifugation, two types of suction lysimeters and zero-tension lysimeters     

Christine E. Geibe  Rolf Danielsson  Patrick A.W. van Hees  Ulla S. Lundstrm 《Applied Geochemistry》2006,21(12):2096-2111

The choice of sampling method for soil solution is of great importance. In this paper soil solution chemistry sampled by centrifugation, two types of suction lysimeters and zero-tension lysimeters have been studied with the purpose of investigating systematic differences between them. The samples were taken at 4 depths from an acidified forest soil as well as from adjacent lime and ash treated soils. A centrifugation drainage method was compared with two types of suction lysimeters (‘Rhizon’ and ‘Prenart’) and zero-tension lysimeters. About half of the 27 variables measured showed a significant difference between the sampling methods used. Typically the centrifuged samples had lower pH (4.0 vs. 4.4), Ca (21 μM vs. 30 μM) and Mg (25 μM vs. 34 μM) concentrations and higher Cl (330 μM vs. 230 μM) and DOC (4.4 mM vs. 3.2 mM) concentrations than the Rhizon lysimeters. Also the other lysimeters showed significant differences compared to the centrifuged samples for about half the number of analytes. Centrifuged samples had higher concentrations of all analytes except NO₃ and PO₄ compared to zero-tension lysimeters and also for all analytes except NO₃ and Al compared to Prenart lysimeters. Among the environmental factors considered depth showed an influence to some extent, while sampling occasion had a great significant impact on the difference between the centrifugation method and the Rhizon lysimeters. Factors like individual pits or soil treatment did not show any influence on the difference between the methods.  相似文献   

The bimodal rift-related Juscelândia volcanosedimentary sequence in central Brazil: Mesoproterozoic extension and Neoproterozoic metamorphism     

Renato Moraes  Reinhardt A. Fuck  Mrcio Martins Pimentel  Simone M.C.L. Gioia  Maria H.B.M. de Hollanda  Richard Armstrong 《Journal of South American Earth Sciences》2006,20(4):287-301

The Barro Alto Complex and Juscelândia volcanosedimentary sequence are exposed in the central part of the Neoproterozoic Brasília belt of central Brazil. The former is a large (approximately 150 km long), boomerang-shaped, mafic-ultramafic, layered complex formed by two different intrusions metamorphosed under granulite facies. These rocks are tectonically overlain by rocks of the Juscelândia volcanosedimentary sequence, represented mainly by biotite-gneiss and amphibolite, or amphibolite facies metamorphic equivalents of rhyolite and basalt, respectively. New SIMS U–Pb zircon data and Sm–Nd isochron data presented herein help clarify the igneous and metamorphic evolution of the Juscelândia volcanosedimentary sequence, as well as its relationship with the Barro Alto Complex. Zircon grains from two biotite gneisses were analyzed by SIMS (SHRIMP) and indicate Mesoproterozoic dates, approximately 1.28 Ga, interpreted as the time of bimodal volcanism in a tectonic setting transitional between a continental rift and an ocean basin. Metamorphism is constrained by Sm–Nd garnet-whole-rock isochrons for garnet amphibolite and pelitic schists of the Juscelândia sequence, as well as for clinopyroxene-garnet amphibolite and garnet granulite of the Barro Alto Complex, which give ages between 0.74 and 0.76 Ga, in agreement with SIMS dates for metamorphic zircon rims. These new data are significant, because they establish that a single metamorphic event affected both the Barro Alto Complex and the Juscelândia sequence. Based on these new data, we present a modified tectonic model for the Brasília belt.  相似文献   

An Albian–Cenomanian unconformity in the northern Andes: Evidence and tectonic significance     

Elsa Jaimes  Mario de Freitas 《Journal of South American Earth Sciences》2006,21(4):466

The Villeta Group of Colombia and equivalent stratigraphic units of Venezuela and Ecuador comprise marine sequences ranging from Albian to Santonian in age. Deposition of the Villeta Group was presumed to take place entirely in quiet tectonic conditions in a passive margin setting that occupied NW South America. From a large database of 2D/3D seismic, well, surface geology, and biostratigraphic data, we present evidence for intra-Villeta (mostly late Albian–Cenomanian) deformation in parts of the Upper Magdalena Valley and Eastern Cordillera of Colombia, controlled by transpressional fault reactivation, produced by transpressional fault reactivation and thrusting that resulted in an angular unconformity. This event has been largely unnoticed in the literature, but previously scattered evidence supports our observations, suggesting regionally extensive tectonism. Published fission-track age determinations and other geologic evidence from Colombia and Venezuela suggest significant uplifts around 80–100 m.y., which may reflect changes in the subduction regime, with compressional deformation in certain regions and extensional deformation in others. A late Albian onset of compressional deformation along the Colombian and Peruvian segments of the Andes may be related to the opening of the South Atlantic Ocean at equatorial latitudes. Identification of tectonic activity with development of an unconformity in intra-Villeta times provides new insights into understanding the evolution of the Upper Magdalena Valley and adjacent areas of Colombia and western Venezuela and creates new possibilities for hydrocarbon exploration, with additional trapping phases, better reservoir preservation by early migration and secondary porosity, and ultimately facies changes with stratigraphic potential.  相似文献   

Effects of magnetic interactions in anisotropy of magnetic susceptibility: Models, experiments and implications for igneous rock fabrics quantification     

Philippe Gaillot  Michel de Saint-Blanquat  Jean-Luc Bouchez   《Tectonophysics》2006,418(1-2):3

Besides granites of the ilmenite series, in which the anisotropy of magnetic susceptibility (AMS) is mainly controlled by paramagnetic minerals, the AMS of igneous rocks is commonly interpreted as the result of the shape-preferred orientation of unequant ferromagnetic grains. In a few instances, the anisotropy due to the distribution of ferromagnetic grains, irrespective of their shape, has also been proposed as an important AMS source. Former analytical models that consider infinite geometry of identical and uniformly magnetized and coaxial particles confirm that shape fabric may be overcome by dipolar contributions if neighboring grains are close enough to each other to magnetically interact. On these bases we present and experimentally validate a two-grain macroscopic numerical model in which each grain carries its own magnetic anisotropy, volume, orientation and location in space. Compared with analytical predictions and available experiments, our results allow to list and quantify the factors that affect the effects of magnetic interactions. In particular, we discuss the effects of (i) the infinite geometry used in the analytical models, (ii) the intrinsic shape anisotropy of the grains, (iii) the relative orientation in space of the grains, and (iv) the spatial distribution of grains with a particular focus on the inter-grain distance distribution. Using documented case studies, these findings are summarized and discussed in the framework of the generalized total AMS tensor recently introduced by Cañon-Tapia (Cañon-Tapia, E., 2001. Factors affecting the relative importance of shape and distribution anisotropy in rocks: theory and experiments. Tectonophysics, 340, 117–131.). The most important result of our work is that analytical models far overestimate the role of magnetic interaction in rock fabric quantification. Considering natural rocks as an assemblage of interacting and non-interacting grains, and that the effects of interaction are reduced by (i) the finite geometry of the interacting clusters, (ii) the relative orientation between interacting grains, (iii) their heterogeneity in orientation, shape and bulk susceptibility, and (iv) their inter-distance distribution, we reconcile analytical models and experiments with real case studies that minimize the role of magnetic interaction onto the measured AMS. Limitations of our results are discussed and guidelines are provided for the use of AMS in geological interpretation of igneous rock fabrics where magnetic interactions are likely to occur.  相似文献   

Modèles géostatistiques de concentrations ou de débits le long des cours d'eau     

Chantal de Fouquet  Caroline Bernard-Michel 《Comptes Rendus Geoscience》2006,338(5):307-318

Estimating concentrations or flow rates along a stream network requires specific models. Two classes of models, recently proposed in the literature, are generalized, to the intrinsic case in particular. We present a global construction by ‘streams’, i.e. on the whole set of paths between sources and outlet. Combining stationary or intrinsic one-dimensional random functions leads to stationary or intrinsic models on segments, with discontinuities at the forks. A construction from outlet to sources, leads to stationary or intrinsic models on each stream, without any discontinuity at the forks. The linear variogram is found as a particular case. The extension to the linear model of coregionalization is immediate, allowing a multivariate modelling of concentrations. To cite this article: C. de Fouquet, C. Bernard-Michel, C. R. Geoscience 338 (2006).  相似文献   

Precambrian fluvial deposits: Enigmatic palaeohydrological data from the c. 2–1.9 Ga Waterberg Group, South Africa     

Patrick G. Eriksson  Adam J. Bumby  Jacobus J. Brümer  Markus van der Neut 《Sedimentary Geology》2006,190(1-4):25-46

Precambrian fluvial systems, lacking the influence of rooted vegetation, probably were characterised by flashy surface runoff, low bank stability, broad channels with abundant bedload, and faster rates of channel migration; consequently, a braided fluvial style is generally accepted. Pre-vegetational braided river systems, active under highly variable palaeoclimatic conditions, may have been more widespread than are modern, ephemeral dry-land braided systems. Aeolian deflation of fine fluvial detritus does not appear to have been prevalent. With the onset of large cratons by the Neoarchaean–Palaeoproterozoic, very large, perennial braided river systems became typical. The c. 2.06–1.88 Ga Waterberg Group, preserved within a Main and a smaller Middelburg basin on the Kaapvaal craton, was deposited largely by alluvial/braided-fluvial and subordinate palaeo-desert environments, within fault-bounded, possibly pull-apart type depositories.

Palaeohydrological data obtained from earlier work in the Middelburg basin (Wilgerivier Formation) are compared to such data derived from the correlated Blouberg Formation, situated along the NE margin of the Main basin. Within the preserved Blouberg depository, palaeohydrological parameters estimated from clast size and cross-bed set thickness data, exhibit rational changes in their values, either in a down-palaeocurrent direction, or from inferred basin margin to palaeo-basin centre. In both the Wilgerivier and Blouberg Formations, calculated palaeoslope values (derived from two separate formulae) plot within the gap separating typical alluvial fan gradients from those which characterise rivers (cf. [Blair, T.C., McPherson, J.G., 1994. Alluvial fans and their natural distinction from rivers based on morphology, hydraulic processes, sedimentary processes, and facies assemblages. J. Sediment. Res. A64, 450–489.]). Although it may be argued that such data support possibly unique fluvial styles within the Precambrian, perhaps related to a combination of major global-scale tectono-thermal and atmospheric–palaeoclimatic events, a simpler explanation of these apparently enigmatic palaeoslope values may be pertinent. Of the two possible palaeohydrological formulae for calculating palaeoslope, one provides results close to typical fluvial gradients; the other formula relies on preserved channel-width data. We suggest that the latter will not be reliable due to problematic preservation of original channel-widths within an active braided fluvial system. We thus find no unequivocal support for a unique fluvial style for the Precambrian, beyond that generally accepted for that period and discussed briefly in the first paragraph.  相似文献